Apex Industries is a reputed Manufacturer & Exporters of Air Handling unit with EC Fan Motors are developed based on casing design platform.  Smooth galvanized steel inner and outer casing. Air leakage is virtually eliminated by double gasketed doors and high strength panels and door locking mechanisms. AHU sections that ship separately

are fully gasketed at the joint and clamped together with easy to install fasteners. Double skin construction is provided by “sandwich” type panels with high density strip. The foam panel and profile skins are injected with Zero ODP & Zero GWP PU foam of 45kg/m3, providing a thermal conductivity coefficient lower. The drain pan uses 20mm thickness synthetic insulation for thermal resistance

and anti-condensation. Energy saving. Direct drive EC plug fans are significantly more efficient

than equivalent AC motor belt drive fans. Over the full and part load operating spectrum, the ECM fan is up to 20% more efficient than a standard induction motor, variable speed, belt driven fan. Lower sound level. Commutation and stator design make for low-noise magnetization of the exciter field. This results in an acoustically imperceptible high cycle frequency.  Wide fan speed. EC fan can be operated on 0-100% capacity using a 0-10V dc control signal, whereby the fan speed can be continuously variable.